GERnano- Active Stage Application for 12 Cylinder Engine

GERnano- Active Stage Application for 12 Cylinder Engine

ر.ع.50.400

Gernano? 18ml Active Stage

THE FUTURE OF LUBRICANTS
New applications by the use of Gernano?

GERnano can be applied in all lubricated equipment. It helps dealing with equipment that has repeated failures related to lubricants, reduces wear & tear of expensive parts and delivers operational cost savings.

Description

GERnano? provides the lubricants new special and permanent properties:

– The frictional surfaces are cleaned thoroughly, independent of the actual condition of the lubricant.
– It improves the local viscosity in the frictional areas.
– It increases the heat capacity of the lubricant.
– It modifies the frictional surfaces, the surface tension and consequentially the wear reduces.
– It protects the frictional surface against electro-chemical corrosion.
– The oil consumption of the engine reduces dramatically and the life-span of the lubricant increases.
– It reduces emissions in combustion engines which leads? to fuel-consumption reduction.

The application of GERnano? in fluid hydro carbonates doesn?t alter the chemical and physical properties of the lubricants. The certifi ed specifi cations of the lubricants
remain unchanged after the applications of GERnano?.

Reduced Oil Consumption and Higher Compression

The use of GERnano in engine-oil will reduce the actual oil consumption significantly as the total amount of oil entering the combustion chamber is reduced. This happens via the removal of carbon and varnish deposits on piston-rings and the increase of the local viscosity in the surroundings of the piston-rings. The oil-structure present at the piston rings and any other areas with play reduce pressure losses and deliver a material measureable increase in compression.

?

Instructions for GERnano?

?

GERnano? used engine:
Application of GERnano? is in 2 Steps and added in 2
dosages in to the engine oil circuit.
First step:
1. run engine to warm up, min. 5 min?s
2. inject first amount (Oil content in l = GERnano in ml)
flush injector several times with your engine oil into
engine, make sure no nano particles are wasted
3. keep engine running for at least 10 min?s or drive
4. the drive up to 150 ? 200 km
second step (after appr. 150 – 250 km drive):
1. Oil filter change essential. Oil change strongly
recommended
2. A change of the engine oil is not compulsive. In order
to fully exploit the effect of the product, however, an oil
change is recommended.
3. run engine to warm up, min. 5 min?s
4. inject second amount (Oil content in l x1.5 = GERnano
in ml ) flush injector several times with your engine oil
into engine make sure no nano particles are wasted
5. keep engine running for at least 10 min?s or drive
6. the effect is increasing by mileage

GERnano? new engine:
1. run engine to warm up, min. 5 min?s
2. inject total amount (Oil content in l x 2 = GERnano in
ml) flush injector several times with your engine oil into
engine, make sure no nano particles are wasted
3. keep engine running for at least 10

?

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.

Be the first to review “GERnano- Active Stage Application for 12 Cylinder Engine”

Your email address will not be published. Required fields are marked *

    IBN Alhajri Help Desk 24*7

  • info@ibnalhajri.com

  • Whatsapp/Call: 24467160